A Common Problem to Boot : No Keyboard Detected!

Yes. This is a common problem, especially when we try to install new windows. I found this problem for several times in my PC and it had Asus motherboard. From many comments and blogs, I also knew that this problem is shown definitely in Asus motherboard. However, we will discuss here continuously about the solution of this problem.  Generally, we can notice this problem to see the dialogue ‘No keyboard detected. Press f1 to continue.’ It is really very boring dialogue and I became so much angry to see this. No keyboard detected, but how can I press f1! I was really bored.

It is very basic and I am sure that anyone who face this problem, he/she tries this method. This method is to check the port and unplug the keyboard. Then again plugin the keyboard. It sometimes can work, if there is any problem in port, it may be loose or problem in cable. And if it works after newly plugin the keyboard cable, it is not actually any problem- I think. Especially problem is that, when we see this dialogue again and
again. Now the 1st effective way. Hope, you know about the CMOS. 

The full meaning of CMOS is ‘complementary metal oxide semiconductor'. It is a very small memory that save all the BIOS settings. You will notice that your computer’s time and date is always accurate. You have no need to correct it regularly. It is updated automatically and this is the work of CMOS battery. This battery is larger than normal battery of hand-watch and placed on motherboard. We mention this method as ‘Clear CMOS Method’. First of all unplug all the cables of your computer, especially all the power cables. Remove the cables of HDD, graphics card. Then take aside the CMOS battery. 

Do you know, What Are Actually Digital Products?

Turn on the power button to purify the total system. You should use the jumper or switch to fully clear the CMOS and hold it for minimum 10 seconds. Keep your computer unplugged like this for more than 2 hours. Then reconnect all the cables and boot again. In the second way, you should unplug all the cables of your computer. It may be your RAM, graphics card, networks card, HDD, SDD and any other parts. Then remove the battery. Keep it unplugged more than one night that means above 12 hours. 

Turn on the power and purify the computer. To clear CMOS, use jumper of your motherboard. Then plug all the cables and boot. I especially used this way. I used a media cable to connect my keyboard and mouse with CPU. You can use USB 3.0 port. I am so much confident that you will be fully successful to use this method. When you are failed to use those steps, then without any hesitation, you can use this way.
I am at the end point of this discussion. I think, you will be benefited. Be conscious and keep your PC more perfect and more powerful.